TelecomStudy18

When MS in a GSM cell obtain the list of neighboring UMTS cells and cell reselection parameters through System Information 2ter and System Information 2Quater. Based on the list and parameters, the MS measures the neighboring UMTS cells. When the MS is in idle mode or packet transfer mode, the method for cell reselection from a GSM cell to the UMTS cell is the same as that between GSM cells. The GSM network controls the cell reselection from the GSM cell to a UMTS cell through TDD Cell Reselect Diversity . TDD Cell Reselect Diversity indicates the signal strength difference between candidate UMTS cells and the serving GSM cell. This parameter is a key factor for controlling the cell reselection from the GSM cell to the UMTS cell. CPICH RSCP > RLA_C + TDD Cell Reselect Diversity When TDD Cell Reselect Diversity is set to a small value, the cell reselection condition is easy to meet. In this case, the number of MSs that camp on the GSM cell reduces. When TDD Cell Res...

Page Under construction

!! Search  !!

  Your Privacy Your privacy is important to us. To better protect your privacy we provide this notice explaining our online information practices and the choices you can make about the way your information is collected and used. To make this notice easy to find, we make it available on our homepage and at every point where personally identifiable information may be requested. Our Commitment To Childrens Privacy Protecting the privacy of the very young is especially important. For that reason, telecomstudy18.blogspot.com will never collect or maintain information at our website from those we actually know are under 18, and no part of our website is structured to attract anyone under 18. Under our Terms of Service, children under 18 are not allowed to access our service. Collection of Personal Information When visiting .telecomstudy18.blogspot.com, the IP address used to access the site will be logged along with the dates and times of access. This information is purely us...

Mobile country code (MCC) is a 3 digit code, assigned by international telecom union to identify a country in a mobile communication. Mobile network code (MNC) is a 2 to 3 digit code, assigned by national authority. Public land mobile network identity (PLMN Id) consists of MCC and MNC. It is used for unique identification of a PLMN. Tracking area identity (TAI) is globally unique and consists of PLMN id and tracking area code (TAC) where TAC is of 16 bits and it is used to indicate eNB to which Tracking Area the eNB belongs  and it is unique within a PLMN. It is similar to location area identity (LAI) in GSM. International Mobile Subscriber Identity (IMSI) consists of PLMN id and Mobile subscriber identification number (MSIN). It is unique identification of mobile (LTE) subscriber and not more than 15 digits. MME temporary Mobile Subscriber Identity (M-TMSI) is unique within MME and assigned by the operator. It is of 32 bits. SAE Temporary Mobile Subscriber I...

RLT - Radio Link Timeout When SACCH is not decoded this counter is decreased by 1 when it is reaches to zero it result normal call drop. In this period if SACCH is decoded counter is increased by 2. ›        This parameter indicate how much time call maintained when radio environments is bed. ›        If RLT value is high then call is sustain longer time. it is affected to customer  customers perception. ›        Highway and in building cells have higher value of RLT parameter and it is give better improvement of call drops. ›        This parameter is define in AMRFR & AMRHR and  also Non AMRFR & Non AMRHR ›        We can also check this on TEMS radio parameter window one time slot lasts 0.577ms, Bursts period is 4.615ms 1 SACCH Period= 4.615X104 bursts    (4x26=104 bursts)  = 480ms ...

Cells Optimization for Achieving Radio KPI’s:       -  NETWORK & Cell LEVEL KPIs: SDCCH DROPS, SDCCH BLOCKING, SDCCH CONGESTION, TCH DROPS, TCH BLOCKING, TCH CONGESTION, TASR, HOSR, RASR and PSR. ∆     Monitoring of 2G Radio Network KPIs using M2000i and CME tool. ∆     Ensuring Network Quality by Analyzing Daily and Weekly worst cells and troubleshooting ∆     Definition and configuration of KPIs using M2000 ∆     Identify & Resolve RF Problems either due to parameters or hardware ∆     Cell level Radio Parameter audit & Tuning and clear discrepancies ∆     Audit of KPI Counter and formula ∆     Responsibility of AMR half rate tuning of circle level. ∆     Involve in NQI Improvement as per grade of services ∆     Working on critical network issues with NHQ, TAC and Vendor Team. ∆  ...