GSM Locating urgency cell Parameter


Urgency Conditions for Handover [Locating Algorithm]
Parameter
Description
Range
Ericsson Dafault Value
Remarks
TALIM
Timing advance limit for handover - Urgency detection parameter
0 to 63 (normal cell) Bits periods (bp)
62
TALIM determines the maximum timing advance that the MS is recommended to use in the cell
PSSBQ
Signal strength penalty when handover due to bad quality. This penalty  is valid during PTIMBQ
0 to 63 db
10 dB
-
PSSTA
Signal strength penalty when handover doe to too large timing advance. It is valid during PTIMTA
0 to 63 db
63
-
PTIMBQ
Penalty time when handover due to bad quality
0 to 600 seconds
10
-
PTIMTA
Penalty time when handover due to too large timing advance
0 to 600 seconds
10
-
QLIMDL
Quality limit downlink for handover. Urgency detection parameter
0 to 100 dtqu
55
Deci transformed GSM quality units (dtqu).
QLIMUL
Quality limit uplink for handover. Urgency detection parameter
0 to 100 dtqu
55
Deci transformed GSM quality units (dtqu).

Comments

Popular posts from this blog

SCFT - Single Cell Function test

Troubleshooting for GSM KPIs (SD Block & SD Drop)

PS core network