Huawei Power Control 3 Parameter

-

Parameter ID Parameter Name Recommended Value
MRMISSNUM MRMissNumber 5
ULADJPRD PwrCtrlULAdjPeriod 3
DLADJPRD PwrCtrlDLAdjPeriod 3
SDMRCUTNUM SdMrCutNum 1
TCHMRCUTNUM TchMrCutNum 3
DLREXLEVEXPFLTLEN DLRexLevExponentFilterLen 3
DLREXQUALEXPFLTLEN DLRexQualExponentFilterLen 3
DLREXLEVSLDWINDOW DLRexLevSlideWindow 1
DLREXQUALSLDWINDOW DLRexQualSlideWindow 1
DLREXLEVADJFCTR DLRexLevAdjustFactor 3
DLREXQUALADJFCTR DLRexQualAdjustFactor 6
DLREXLEVHIGHTHRED DLRexLevHighThred 20
DLREXLEVLOWTHRED DLRexLevLowthred 20
DLFSREXQUALHIGHTHRED DLFSRexQualHighThred 16
DLFSREXQUALLOWTHRED DLFSRexQualLowThred 16
DLHSREXQUALHIGHTHRED DLHSRexQualHighThred 18
DLHSREXQUALLOWTHRED DLHSRexQualLowThred 18
DLAFSREXQUALHIGHTHRED DLAFSRexQualHighThred 14
DLAFSREXQUALLOWTHRED DLAFSRexQualLowThred 14
DLAHSREXQUALHIGHTHRED DLAHSRexQualHighThred 16
DLAHSREXQUALLOWTHRED DLAHSRexQualLowThred 16
DLMAXDOWNSTEP DLMAXDownStep 4
DLMAXUPSTEP DLMAXUpStep 8
ULREXLEVEXPFLTLEN ULRexLevExponentFilterLen 3
ULREXQUALEXPFLTLEN ULRexQualExponentFilterLen 3
ULREXLEVSLDWINDOW ULRexLevSlideWindow 1
ULREXQUALSLDWINDOW ULRexQualSlideWindow 1
ULREXLEVADJFCTR ULRexLevAdjustFactor 3
ULREXQUALADJFCTR ULRexQualAdjustFactor 6
ULREXLEVHIGHTHRED ULRexLevHighThred 18
ULREXLEVLOWTHRED ULRexLevLowThred 18
ULFSREXQUALHIGHTHRED ULFSRexQualHighThred 16
ULFSREXQUALLOWTHRED ULFSRexQualLowThred 16
ULHSREXQUALHIGHTHRED ULHSRexQualHighThred 18
ULHSREXQUALLOWTHRED ULHSRexQualLowThred 18
ULAFSREXQUALHIGHTHRED ULAFSRexQualHighThred 14
ULAFSREXQUALLOWTHRED ULAFSRexQualLowThred 14
ULAHSREXQUALHIGHTHRED ULAHSRexQualHighThred 16
ULAHSREXQUALLOWTHRED ULAHSRexQualLowThred 16
ULMAXDOWNSTEP ULMAXDownStep 6
ULMAXUPSTEP ULMAXUpStep 8
SAICTHREDAPDTVALUE Power Control threshold Adjust for SAIC 3
FINESTEPPCALLOWED 0.2dB Power Control Enable NO
PWRCTRLOPTIMIZEDEN III Power Control Optimized Enable NO
ULFILTADJFACTOR III UL Filter Adjust Factor 3
DLFILTADJFACTOR III DL Filter Adjust Factor 3
ULRXLEVPROTECTFACTOR III UL RexLev Protect Factor 6
ULRXQUALPROTECTFACTOR III UL RexQual Protect Factor 75
DLRXLEVPROTECTFACTOR III DL RexLev Protect Factor 5
DLRXQUALPROTECTFACTOR III DL RexQual Protect Factor 55
AMRCALLPCALLOWED Allow III Power Control For AMR ON
NONAMRCALLPCALLOWED Allow III Power Control For Non-AMR ON

Popular posts from this blog

SCFT - Single Cell Function test

-
Single Cell Function test SCFT is for verifying whether individual BTS works well or not, by making a single cell function test of BTS hardware and software. Essential items to be tested are as follows: 1) BTS Transmitter Output Measurement Test 2) Initial parameter establishment (Pilot PN/System ID/Site ID/Frequency, Neighbor List) 3) Call Origination and Termination Test 4) Softer Handoff Test/Antenna installation check (Direction, Tilt, Transmission Line) 5) Single Cell Coverage Test 6) Noise Floor Test 7) Parameter check.
Read more

Troubleshooting for GSM KPIs (SD Block & SD Drop)

-
KPIs to be monitored: ·             SD Blocking ·             SD Drop SDCCH Channel: ·    SDCCH channel is a dedicated channel which is using for LAC updation, Call Setup, SMS in Ideal mode. It works in UL & DL SD Blocking: ·    SD Blocking means that you are not getting SD resource for the call origination. When MS connects with Network then RACH and AGCH are provided. After AGCH, SDCCH is provided but if SDCCH is not provided at this time due to some problem or due to unavailable of SD by BSC. KPI Formula in Ericsson: ·             SDCCH CONGESTION = (CCONGS / CCALLS) * 100 ·             CCONGS - Congestion counter. ·  ...
Read more

PS core network

-
Image
The PS core network consists of two parts, the traditional General Packet Radio Service (GPRS) core network and the new Evolved Packet System (EPS) core network. The PS core network connects mobile subscribers to Packet Data Networks (PDNs) such as the Internet, corporate networks or operator services networks.  a functional overview of the PS core network. Logical entities and interfaces are shown in black and form a 2G/3G network, while the blue boxes and lines in Figure  show the LTE/EPC related parts. The LTE/EPC network can be regarded as an extension and evolution of existing 2G/3G networks. From a node implementation perspective, there is no strict border between the two networks. The corresponding logical entities of GPRS and EPS networks can be deployed concurrently in Ericsson PS core nodes, such as the SGSN-MME and EPG; these are marked in red. In addition, Ericsson GPRS nodes can be upgraded with EPC functionality by software only. Network evolution i...
Read more