Ericsson Counter: Call Attempts

-
CCALLS : Channel allocation attempt counter (on SDCCH).

CMSESTAB : Successful MS channel establishments on SDCCH.

CCONGS : Congestion counter for underlaid subcell. Stepped per congested allocation attempt. The counter for overlaid subcell is CCONGSSUB.

CESTCHACTIV :  Number of SDDCH establishment failure that occurs under channel allocation and channel activation. Note that this counter is stepped also in case of SDCCH congestion.

CESTIMMASS : Number of SDCCH establishment failure due to timeout after sending Immediate Assignment, timer T3101 expired.

TFCASSALL : Number of assignment complete messages for all MS power classes in underlaid subcell, full-rate. There is also an identical counter for overlaid subcells, TFCASSALLSUB. There are corresponding counters for half-rate.

TASSATT : Number of first assignment attempts on TCH for all MS power classes. Both successful and unsuccessful attempts are counted in the target cell.

TASSALL : Number of first assignment attempts on TCH for all MS power classes. Successful attempts are counted in the target cell and failed attempts are counted in the serving cell. The serving cell is the cell where the mobile station was tuned to an SDCCH or TCH for signalling.


TCASSALL : Number of assignment complete messages on TCH for all MS power classes.

Read Also other topis : Ericsson Counter: Paging, Drops on SDCCH, Congestion, Dropped Calls, Handover, Speech Quality, Intra-Cell Handover, OL/UL Subcell

Popular posts from this blog

SCFT - Single Cell Function test

-
Single Cell Function test SCFT is for verifying whether individual BTS works well or not, by making a single cell function test of BTS hardware and software. Essential items to be tested are as follows: 1) BTS Transmitter Output Measurement Test 2) Initial parameter establishment (Pilot PN/System ID/Site ID/Frequency, Neighbor List) 3) Call Origination and Termination Test 4) Softer Handoff Test/Antenna installation check (Direction, Tilt, Transmission Line) 5) Single Cell Coverage Test 6) Noise Floor Test 7) Parameter check.
Read more

Troubleshooting for GSM KPIs (SD Block & SD Drop)

-
KPIs to be monitored: ·             SD Blocking ·             SD Drop SDCCH Channel: ·    SDCCH channel is a dedicated channel which is using for LAC updation, Call Setup, SMS in Ideal mode. It works in UL & DL SD Blocking: ·    SD Blocking means that you are not getting SD resource for the call origination. When MS connects with Network then RACH and AGCH are provided. After AGCH, SDCCH is provided but if SDCCH is not provided at this time due to some problem or due to unavailable of SD by BSC. KPI Formula in Ericsson: ·             SDCCH CONGESTION = (CCONGS / CCALLS) * 100 ·             CCONGS - Congestion counter. ·  ...
Read more

PS core network

-
Image
The PS core network consists of two parts, the traditional General Packet Radio Service (GPRS) core network and the new Evolved Packet System (EPS) core network. The PS core network connects mobile subscribers to Packet Data Networks (PDNs) such as the Internet, corporate networks or operator services networks.  a functional overview of the PS core network. Logical entities and interfaces are shown in black and form a 2G/3G network, while the blue boxes and lines in Figure  show the LTE/EPC related parts. The LTE/EPC network can be regarded as an extension and evolution of existing 2G/3G networks. From a node implementation perspective, there is no strict border between the two networks. The corresponding logical entities of GPRS and EPS networks can be deployed concurrently in Ericsson PS core nodes, such as the SGSN-MME and EPG; these are marked in red. In addition, Ericsson GPRS nodes can be upgraded with EPC functionality by software only. Network evolution i...
Read more