Ericsson Counter : Paging

-
PAGPCHCONG :  Number of paging messages discarded due to full cell paging queue.

PAGETOOOLD  : Number of paging messages discarded due to being too long in the paging queue. At the point when a page is taken from the paging queue, its age is calculated and compared to the BTS parameter AGE-OF-PAGING (the parameter is set to 5 seconds in Ericsson BSS). If it is too old, it is discarded and PAGETOOLD is incremented.

TOTPAG :  Number of paging messages received from the MSC.

TOTCONGPAG : Number of paging messages discarded due to lack of capacity in the BSC or due to congestion in the BSC paging queues or due to no Data Link Individual is available for a paging request taken from the paging queue.

NLAPAG1LOTOT : Number of first page attempts to an LA.

NLAPAG2LOTOT : Number of repeated page attempts to an LA.

NLAPAG1RESUCC :  Number of page responses to first page to an LA.

NLAPAG2RESUCC :  Number of page responses to repeated page to an LA.

NLALOCTOT : Total number of LU attempts in the LA.


NLALOCSUCC :  Number of successful LUs in the LA. 

Read Also other topis : Ericsson Counter: Call Attempts, Drops on SDCCH, Congestion, Dropped Calls, Handover, Speech Quality, Intra-Cell Handover, OL/UL Subcell

Popular posts from this blog

SCFT - Single Cell Function test

-
Single Cell Function test SCFT is for verifying whether individual BTS works well or not, by making a single cell function test of BTS hardware and software. Essential items to be tested are as follows: 1) BTS Transmitter Output Measurement Test 2) Initial parameter establishment (Pilot PN/System ID/Site ID/Frequency, Neighbor List) 3) Call Origination and Termination Test 4) Softer Handoff Test/Antenna installation check (Direction, Tilt, Transmission Line) 5) Single Cell Coverage Test 6) Noise Floor Test 7) Parameter check.
Read more

Troubleshooting for GSM KPIs (SD Block & SD Drop)

-
KPIs to be monitored: ·             SD Blocking ·             SD Drop SDCCH Channel: ·    SDCCH channel is a dedicated channel which is using for LAC updation, Call Setup, SMS in Ideal mode. It works in UL & DL SD Blocking: ·    SD Blocking means that you are not getting SD resource for the call origination. When MS connects with Network then RACH and AGCH are provided. After AGCH, SDCCH is provided but if SDCCH is not provided at this time due to some problem or due to unavailable of SD by BSC. KPI Formula in Ericsson: ·             SDCCH CONGESTION = (CCONGS / CCALLS) * 100 ·             CCONGS - Congestion counter. ·  ...
Read more

PS core network

-
Image
The PS core network consists of two parts, the traditional General Packet Radio Service (GPRS) core network and the new Evolved Packet System (EPS) core network. The PS core network connects mobile subscribers to Packet Data Networks (PDNs) such as the Internet, corporate networks or operator services networks.  a functional overview of the PS core network. Logical entities and interfaces are shown in black and form a 2G/3G network, while the blue boxes and lines in Figure  show the LTE/EPC related parts. The LTE/EPC network can be regarded as an extension and evolution of existing 2G/3G networks. From a node implementation perspective, there is no strict border between the two networks. The corresponding logical entities of GPRS and EPS networks can be deployed concurrently in Ericsson PS core nodes, such as the SGSN-MME and EPG; these are marked in red. In addition, Ericsson GPRS nodes can be upgraded with EPC functionality by software only. Network evolution i...
Read more