LTE relation with CDMA2000 Parameter

-

Parameter Name
Parameter Description
Default Value
Cdma2000CellRelationId
The value component of the Relative Distinguished Name (RDN).

externalCdma2000CellRef
Reference to a ExternalCdma2000Cell.

includeInSystemInformation
Indicates if the CDMA2000 cell referred to is included in System Information.
When the includeInSystemInformation is set to false, the CDMA2000 cell is not  included in SIB8.
A maximum of 32 CDMA2000 cells can be included in SIB8.
true
freqCdma
Identifies the carrier frequency within a CDMA2000 Band.

Cdma2000FreqId
The value component of the Relative Distinguished Name (RDN).

reservedBy
Contains a list of MO instances that reserve this MO instance.

Cdma2000FreqBandId
The value component of the Relative Distinguished Name (RDN).

hrpdBandClass
The CDMA-HRPD frequency band in which the HRPD carrier is located.

reservedBy
Contains a list of MO instances that reserve this MO instance.

Cdma2000FreqBandRelationId
The value component of the Relative Distinguished Name (RDN).

cdma2000FreqBandRef
Reference to the Cdma2000 frequency band MO, Cdma2000FreqBand.

threshXHighHrpd
The threshold used in reselection towards a high priority CDMA2000 HRPD band class, expressed as an unsigned binary number equal to FLOOR ([-2 x 10 x log10 Ec/Io]) in units of 0.5 db.

If sNonServingCell > threshXHighHrpd, reselection is considered towards the band class with higher priority. The condition must be valid during the period defined by attribute tReselectionCdmaHrpd.

sNonServingCell is the RX-level value of a neighboring cell.
63
threshXLowHrpd
The threshold used in reselection towards a low priority CDMA2000 HRPD band class expressed as an unsigned binary number equal to FLOOR ([-2 x 10 x log10 Ec/Io]) in units of 0.5 db.
If sServingCell < threshServingLow and sNeighbor > threshXLow (see corresponding attribute), reselection towards this lower prioritized band class is considered. The condition must be valid during the period defined by attribute tReselectionCdmaHrpd.

sServingCell is the RX level value of the serving cell and sNeighborCell is the RX level value of a neighbor frequency.
63
cellReselectionPriority
Absolute priority of the RAT (0 means: lowest priority).
6
Cdma2000FreqRelationId
The value component of the Relative Distinguished Name (RDN).

connectedModeMobilityPrio
Prioritizes CDMA2000 frequencies among all frequencies related to the cell for UEs in connected mode.
(0 means the lowest priority)
6
qOffsetFreq
Indicates a frequency-specific offset to apply when evaluating triggering conditions for measurement reporting.
0
cdma2000FreqRef
Reference to the Cdma2000Freq MO

Cdma2000NetworkId
The value component of the Relative Distinguished Name (RDN).

Popular posts from this blog

SCFT - Single Cell Function test

-
Single Cell Function test SCFT is for verifying whether individual BTS works well or not, by making a single cell function test of BTS hardware and software. Essential items to be tested are as follows: 1) BTS Transmitter Output Measurement Test 2) Initial parameter establishment (Pilot PN/System ID/Site ID/Frequency, Neighbor List) 3) Call Origination and Termination Test 4) Softer Handoff Test/Antenna installation check (Direction, Tilt, Transmission Line) 5) Single Cell Coverage Test 6) Noise Floor Test 7) Parameter check.
Read more

Troubleshooting for GSM KPIs (SD Block & SD Drop)

-
KPIs to be monitored: ·             SD Blocking ·             SD Drop SDCCH Channel: ·    SDCCH channel is a dedicated channel which is using for LAC updation, Call Setup, SMS in Ideal mode. It works in UL & DL SD Blocking: ·    SD Blocking means that you are not getting SD resource for the call origination. When MS connects with Network then RACH and AGCH are provided. After AGCH, SDCCH is provided but if SDCCH is not provided at this time due to some problem or due to unavailable of SD by BSC. KPI Formula in Ericsson: ·             SDCCH CONGESTION = (CCONGS / CCALLS) * 100 ·             CCONGS - Congestion counter. ·  ...
Read more

PS core network

-
Image
The PS core network consists of two parts, the traditional General Packet Radio Service (GPRS) core network and the new Evolved Packet System (EPS) core network. The PS core network connects mobile subscribers to Packet Data Networks (PDNs) such as the Internet, corporate networks or operator services networks.  a functional overview of the PS core network. Logical entities and interfaces are shown in black and form a 2G/3G network, while the blue boxes and lines in Figure  show the LTE/EPC related parts. The LTE/EPC network can be regarded as an extension and evolution of existing 2G/3G networks. From a node implementation perspective, there is no strict border between the two networks. The corresponding logical entities of GPRS and EPS networks can be deployed concurrently in Ericsson PS core nodes, such as the SGSN-MME and EPG; these are marked in red. In addition, Ericsson GPRS nodes can be upgraded with EPC functionality by software only. Network evolution i...
Read more