GSM Neighbor cell Parameter

Neighbor cell Parameter
Parameter	Description	Range	Ericsson Default Value	Remarks
CELLR	Related Cell designation	1 to 7 Characters	-
KHYST	Signal strength hystersis when evaluating K-cells	0 to 63db	3 dB
LHYST	Path Loss hystersis when evaluating L-cells	0 to 63db	3 dB
TRHYST	Signal Strength hysteresis for a K- and L- cell border segment	-63 to 63 db	2 dB
KOFFSET	Signal strength offset when evaluating K-cells	0 to 63 db	0	If set to 6 dB, Slower handover to CELLR
LOFFSET	Path Lloss offset when evalutaing L-cells	-63 to 63 db	0
TROFFSET	Signal strength offset for a K- and L-cell border segment	-63 to 63 db	0
BQOFFSET	Signal strength region for bad quality urgency handovers	0 to 63db	63 dB	If set to 0 dB, faster handover to CELLR
CAND	Candidate Type	AWN, NHN, BOTH	BOTH
	AWN: Neighbour at assignment to worse cell
	NHN: Neighbour at normal handover and at assignment to better cell
	BOTH: Both of the above
AWOFFSET	Signal strength region where assignment to worse cell is allowed	0 to 63 db	3 dB	3 dB -> 20 dB when Serving cell is Congested, to offload to other cell [CELLR]
HIHYST	Signal strength hysteresis when evaluating high signal strength cells	0 to 63 db	5 dB
LOHYST	Signal strength hysteresis when evaluating low signal strength cells	0 to 63 db	3 dB
HYSTSEP	Signal strength separator for high and low signal strength cells	0 to 150 dbm	90 dBm
OFFSET	Signal strength offset	-63 to 63 db	0	The parameter is represented by OFFSETN, if the value is in the range (−63, -1) dB. Positive values, (0, 63) dB, is represented by OFFSETP.