LTE relation with CDMA2000 Parameter

Parameter Name	Parameter Description	Default Value
Cdma2000CellRelationId	The value component of the Relative Distinguished Name (RDN).
externalCdma2000CellRef	Reference to a ExternalCdma2000Cell.
includeInSystemInformation	Indicates if the CDMA2000 cell referred to is included in System Information. When the includeInSystemInformation is set to false, the CDMA2000 cell is not  included in SIB8. A maximum of 32 CDMA2000 cells can be included in SIB8.	true
freqCdma	Identifies the carrier frequency within a CDMA2000 Band.
Cdma2000FreqId	The value component of the Relative Distinguished Name (RDN).
reservedBy	Contains a list of MO instances that reserve this MO instance.
Cdma2000FreqBandId	The value component of the Relative Distinguished Name (RDN).
hrpdBandClass	The CDMA-HRPD frequency band in which the HRPD carrier is located.
reservedBy	Contains a list of MO instances that reserve this MO instance.
Cdma2000FreqBandRelationId	The value component of the Relative Distinguished Name (RDN).
cdma2000FreqBandRef	Reference to the Cdma2000 frequency band MO, Cdma2000FreqBand.
threshXHighHrpd	The threshold used in reselection towards a high priority CDMA2000 HRPD band class, expressed as an unsigned binary number equal to FLOOR ([-2 x 10 x log10 Ec/Io]) in units of 0.5 db. If sNonServingCell > threshXHighHrpd, reselection is considered towards the band class with higher priority. The condition must be valid during the period defined by attribute tReselectionCdmaHrpd. sNonServingCell is the RX-level value of a neighboring cell.	63
threshXLowHrpd	The threshold used in reselection towards a low priority CDMA2000 HRPD band class expressed as an unsigned binary number equal to FLOOR ([-2 x 10 x log10 Ec/Io]) in units of 0.5 db. If sServingCell < threshServingLow and sNeighbor > threshXLow (see corresponding attribute), reselection towards this lower prioritized band class is considered. The condition must be valid during the period defined by attribute tReselectionCdmaHrpd. sServingCell is the RX level value of the serving cell and sNeighborCell is the RX level value of a neighbor frequency.	63
cellReselectionPriority	Absolute priority of the RAT (0 means: lowest priority).	6
Cdma2000FreqRelationId	The value component of the Relative Distinguished Name (RDN).
connectedModeMobilityPrio	Prioritizes CDMA2000 frequencies among all frequencies related to the cell for UEs in connected mode. (0 means the lowest priority)	6
qOffsetFreq	Indicates a frequency-specific offset to apply when evaluating triggering conditions for measurement reporting.	0
cdma2000FreqRef	Reference to the Cdma2000Freq MO
Cdma2000NetworkId	The value component of the Relative Distinguished Name (RDN).

LTE ANR Parameter

Parameter Name	Parameter Description	Default Value
AnrFunctionId	The value component of the Relative Distinguished Name (RDN).
cellAddRankLimitEutran	Threshold value for reported rank for a cell to be automatically added as neighbor.	1
cellAddRsrpOffsetEutran	Threshold offset value for reported power for a cell to be automatically added as neighbor.	-10
cellAddRsrpThresholdEutran	Threshold value for reported power for a cell to be automatically added as neighbor.	-1440
cellAddRsrqOffsetEutran	Threshold offset value for reported quality for a cell to be automatically added as neighbor.	-10
cellAddRsrqThresholdEutran	Threshold value for reported quality for a cell to be automatically added as neighbor.	-1920
hoAllowedEutranPolicy	Starting value of the attribute isHoAllowed when a EUtranCellRelation is created by Automated Neighbor Relations (ANR).	true
removeNcellTime	The length of time that neighbor cells without any neighbor relations remain in the RBS. 1000 means no automatic removal is performed. If set to 0, the neighbor cell MO is removed within 1 minute.	30
removeNenbTime	The length of time that neighbor RBSs without any neighbor cells remain in the RBS. 1000 means no automatic removal is performed. If set to 0, the neighbor RBS MO is removed within 1 minute.	7
removeNrelTime	The length of time that neighbor relations without any communication to the neighbor cell remain in the RBS. 1000 means no automatic removal is performed. If set to 0, the neighbor relation MO is removed within 1 minute.	30
x2SetupPolicy	Indicates if X2 is set up when an ExternalEnbFunction not in the x2BlackList is created by Automated Neighbor Relations (ANR).	true
anrUesEUtraIntraFMax	The maximum target number of UEs in each cell that are assigned Automated Neighbor Relations (ANR)-specific thresholds for E-UTRAN intra-frequency neighbor cell reports. The actual number of UEs with these thresholds may deviate from the target.	20
anrUesEUtraIntraFMin	The minimum target number of UEs in each cell that are assigned Automated Neighbor Relations (ANR)-specific thresholds for E-UTRAN intra-frequency neighbor cell reports. The actual number of UEs with these thresholds may deviate from the target.	1
anrUesEUtraIntraFDecr	The decrease in the target number of UEs in each cell that are assigned Automated Neighbor Relations (ANR)-specific thresholds for E-UTRAN intra-frequency neighbor cell reports, every time a neighbor cell report is received with only known neighbor cells.	10
anrUesEUtraIntraFIncrHo	The increase in the target number of UEs in each cell that are assigned Automated Neighbor Relations (ANR)-specific thresholds for E-UTRAN intra-frequency neighbor cell reports, every time a neighbor cell report for handover is received with unknown neighbor cells.	100
anrUesEUtraIntraFIncrAnr	The increase in the target number of UEs in each cell that are assigned Automated Neighbor Relations (ANR)-specific thresholds for E-UTRAN intra-frequency neighbor cell reports, every time a neighbor cell report for ANR is received with unknown neighbor cells.	20

LTE Paging Parameter

Parameter Name	Parameter Description	Default Value
PagingId	The value component of the RDN.
maxNoOfPagingRecords	The maximum allowed number of paging records included in one Radio Resource Control (RRC) paging message. It is the allowed maximum number of UE that can be paged per paging occasion.	3
defaultPagingCycle	The paging cycle (also referred to as T) used by the RBS and broadcast in system information type 2. If the UE-specific Discontinuous Reception (DRX) cycle is provided in S1AP paging and has a smaller value than defaultPagingCycle, the UE-specific DRX cycle overrides defaultPagingCycle.	128
nB	Used to calculate the number and position of Paging Occasions (PO) and Paging Frames (PF). The numerical value of nB depends on the value of the defaultPagingCycle (T) and can be set to one of the following values: 4T, 2T, T, 1/2T,1/4T, 1/8T, 1/16T, 1/32T When nB is set to T, 2T or 4T, it determines the number of POs per PF, and the PO position in PF. When nB is set to a value smaller than T, it affects the System Frame Number of the PF, the position of PO in the PF, and also distribution of UE into groups with the same PF. When nB is set to a  smaller value, the groups are fewer but larger, or more but smaller.	T
pagingDiscardTimer	The length of time a received paging is retained or queued in the RBS before it is discarded. The timer should be set to the same (or smaller) value as the paging resend timer in MME (T3413). This setting  prevents the RBS from retaining or sending an old paging after the re-sent copy is received from the MME.	3

LTE Admission Control Parameter

Parameter Name	Parameter Description	Default Value
paArpOverride	Allocation Retention Priority level received from the Core Network that eNB interprets as the identifier for Privileged Access. The value zero will disable Privileged Access ARP override.	7
ulNonGbrRatio	This parameter sets the wanted uplink resource utilization ratio of Non-GBR bearers, e.g. for Mobile Broadband users, on transport network. The value given in this parameter specifies the Non-GBR part of the total bandwidth and the remaining part (1-ulNonGbrRatio) sets the GBR part of the total bandwidth. The parameter will be used by the Admission Control to balance GBR and Non-GBR use of resources.	500
dlNonGbrRatio	This parameter sets the wanted downlink resource utilization ratio of Non-GBR bearers, e.g. for Mobile Broadband users, on transport network. The value given in this parameter specifies the Non-GBR part of the total bandwidth and the remaining part (1-dlNonGbrRatio) sets the GBR part of the total bandwidth. The parameter will be used by the Admission Control to balance GBR and Non-GBR use of resources.	500
AdmissionControlId	The value component of the Relative Distinguished Name (RDN).
emergencyArpLimit	ARP (Allocation Retention Priority) value limit used for identifying ARP values that are considered to be part of the emergency (high priority) group. This limit value and all values below are considered to be of high priority. The value zero is introduced to turn off ARP handling.	7
nrOfBearersReserved	Number of bearers reserved for high priority group (bearers with low ARP values, Allocation Retention Priority values). Setting a high value for the reservation means low priority bearers will always be rejected.	0
nrOfRrcConnectedReserved	Number of RRC connections reserved for high priority UEs (handovers and where establishment cause is emergency). Setting a high value means non emergency UEs will always be rejected.	0
dlGbrAdmThresh	Admission threshold for load due to Guaranteed Bit Rate (GBR) bearers in the downlink, expressed as a fraction of the available resources.	1000
dlTransNwBandwidth	Downlink transport network bandwidth for LTE.	1000
ulGbrAdmThresh	Admission threshold for load due to Guaranteed Bit Rate (GBR) bearers in the uplink, expressed as a fraction of the available resources.	1000
ulTransNwBandwidth	Uplink transport network bandwidth for LTE.	1000